Print Page | Close Window

help with scheduler

Printed From: Aurora
Category: Aurora Sequencer Software
Forum Name: Installation Issues
Forum Discription: This is the place to discuss issues with installing Aurora
URL: http://www.aurorashow.com/forum/forum_posts.asp?TID=312
Printed Date: 31 Oct 2024 at 6:47pm
Software Version: Web Wiz Forums 9.06 - http://www.webwizforums.com


Topic: help with scheduler
Posted By: bigvic
Subject: help with scheduler
Date Posted: 11 Sep 2008 at 3:34am
after getting over the install problems with with error codes l am now faced with more issues  after deciding to have a play with schedular. The program doesn't do anything after it loads up.  l see a calender in front of me, l go file/ new schedule and see day of week settings stop and start times etc, when l input the times in, the dates, files to be played and so on , i then hit the bottom add button,  click on start scheddular and thats it, nothing else happens, nothing appears in the calender and nothing plays, what am l doing wrong ?. At this point l am not connected to any controller but have set up the comm ports in the past. any one got any ideas or am l just having a blond moment and doing  or not doing something  stupid.
 
 
bigvic



Replies:
Posted By: RandyA
Date Posted: 12 Sep 2008 at 8:48am
BigVic,

I just tried the scheduler and captures the steps that I did. I will try to attach some images.




and here is what showed up & ran.



Hope this helps you out.

Randy


Posted By: Slinkard
Date Posted: 12 Sep 2008 at 11:41am

Just wanted to jump in here and do a little explanation on some scheduler items. prolly not the right place but these are some cool functions that I found last year.

When you have your scheduled show completed and started, at the scheduled time (Say 6pm) if you have something in the top Run once field it will kick off the show. Once it completes the scheduler then continues in to the loop field. These sequences will play in a loop back mode until the end time is met.
 
So if your loop song starts at 10:59 and you want your show to end at 11pm that song will continue to play until it completes. so say you had a 4 minute song the loop will play until 11:03. Next it moves to the bottom Run Once field and starts that sequence.
 
So the net net here is even though you have your show scheduled to end at 11pm it wont just terminate at 11pm! it will wrap up the show at that time!
 
Also things that old spectrum users are going to love!!!!! There is a at most 3 second delay in between songs! thats right no killer ramp up on your RAM either and the songs just run perfectly.
 
Last year I left for 5 days to northern CA. I had just set up Aurora, and scheduled a show. I locked my computer and took off to norcal. I got back at around 8:30pm I turned my radio to 96.1 at the buttom of the hill and to my pure shock and amazement it was playing!!! Even better when i got with in line of sight to my display, the lights were still working! OMG you couldn't have done that with Spectrum no way no how.
 
I have been completely happy with them since the day one
 
Slink 
 


-------------
http://www.aurorashow.com/">
Coming soon www.computerizedlights.com


Posted By: LightChristmas
Date Posted: 12 Sep 2008 at 12:03pm
Just a bit of history here.

Michael saved our collective bacon the first year Spectrum came out by cobbling up a scheduler that worked. Have used the LightsOnLogan Player every season until Aurora came out.


-------------
http://www.aurorashow.com/">


Posted By: bigvic
Date Posted: 13 Sep 2008 at 3:08am
thanks for your replies, but l have done exactly what randy did and still no go, nothing just happens and l do not get anything appearing in the calender. I get the same results on 3 computers. heeeeeeeeeeelp
 
bigvic


Posted By: bigvic
Date Posted: 17 Sep 2008 at 7:34am
CAN anyone tell me were l can get an earlier version of schedular seeing asd my current version does not work
 
bigvic


Posted By: JonB256
Date Posted: 17 Sep 2008 at 8:12am
Bigvic, when you create a schedule item by clicking on a calendar square, are you changing the date at the top? I noticed that, just because I clicked on September 8, 2008, it didn't automatically create an entry for September 8, 2008. Perhaps it is saving your entry on a calendar page that isn't visible? (say, October 9, 2007). Since you are on the wrong side of the equator LOL, anything is possible.
 
Another thought - and perhaps the Aurora programmers can answer this one - you may not have the correct font installed to display on the calendar. If they were very specific in their program about font name and not just font family, it could appear blank.


-------------
JonB - D-Light user


Posted By: bigvic
Date Posted: 23 Sep 2008 at 5:15am
jon
l have had some progress with schedular , l put in to start a sequence on dec 1 to dec 31 and got an input on the calender for dec 12 ,28, 29, 30 and 31st and also jan 12 feb 12th and march 6th, any ideas on this one, because l am just about to go back to spectrum, at least their stuff worked .
 
bigvic 


Posted By: JonB256
Date Posted: 23 Sep 2008 at 5:43am

bigvic, those details don't really help me, but it should mean something to the programmers. 

What format do you have your date set for in Windows? Do you have MM/DD/YY or DD/MM/YY 

It may make a difference. In the Control Panel, Regional and Language Options, I am set for "English (United States)"  If you are set for "English (Australia)" it may make difference.



-------------
JonB - D-Light user


Posted By: bigvic
Date Posted: 23 Sep 2008 at 6:12am
jon
 
good to talk tou live , what time is it there.
anyway l am set dd/mm/yy and l was set to american english , l'll tryto test it with australian english.
I have also talked to Ralph here in melbourne , here is going to download and try it. The strange thing about my problem is that it has happened on 3 different computers, 2 running vista and one running xp, maybe l need to talk to the programmers.
 
regards bigvic


Posted By: bigvic
Date Posted: 23 Sep 2008 at 7:18am
hi again jon
l have changed the date format from dd/mm/yy to the american way of mm/dd/yy and hey presto the thing finally worked, hooray , hooray. thanks again jon for your help and the date clue.
 
regards bigvic


Posted By: ChrisL1976
Date Posted: 23 Sep 2008 at 8:29am
It may have something to do with your Timezone setting.  Or its just a coincidence that my scheduler that has worked fine for the last couple weeks now wont even open.  I changed my timezone on my computer to Sydney, created a sequence which although did layout correct on the calendar.  I closed scheduler and reopened and now get this.  Restarting the computer has not fixed it nor had changing the time-zone back to mine.






  

-------------
Chris

www.lightsonsixth.com


Posted By: JonB256
Date Posted: 23 Sep 2008 at 1:35pm
Bigvic - glad to have helped. It was the "scattering" of dates you got that made me think of that.
 
Chris - to quote you, "I ... reoponed and now get this."  What is "this?"  Are you saying you now have Bigvic's problem?


-------------
JonB - D-Light user


Posted By: bigvic
Date Posted: 24 Sep 2008 at 1:55am
hi chris
 
l didn't actually change my time zone , l made sure that l was set on US English and set my date format to mm/dd/yy. In australia we tend to use dd/mm/yy but as schedular was written in the US it probably recognises mm/dd/yy format and not the one we generally use. So l suppose that for the month of december my date format will be mm/dd/yy.
As for your problem even l haven't  had that come up, lwould suggest go back to basics and reset your setting bact to original and see what happens. Just one question chris, why did u set your time zone to sydney when u are in the states. there is an old saying Confusious said , "if it is not brokeno ,don't fix ito"
 
Regards bigvic
 


Posted By: ChrisL1976
Date Posted: 24 Sep 2008 at 11:04am
Originally posted by JonB256

 
Chris - to quote you, "I ... reoponed and now get this."  What is "this?"  Are you saying you now have Bigvic's problem?



After I changed the time zone, and tried to open Scheduler, that error started coming up.

It finally opened up cleanly about 4pm yesterday after probably 20 times opening it and 4 restarts




-------------
Chris

www.lightsonsixth.com


Posted By: ChrisL1976
Date Posted: 24 Sep 2008 at 11:06am
Originally posted by bigvic

 

 Just one question chris, why did u set your time zone to sydney when u are in the states. there is an old saying Confusious said , "if it is not brokeno ,don't fix ito"
 
Regards bigvic
 


Just wanted to see if that would recreate your issue.  Easier to fix the bug if you can recreate it.    Its on my work computer, so the scheduler is not going to be used anyways..Smile




-------------
Chris

www.lightsonsixth.com


Posted By: JonB256
Date Posted: 24 Sep 2008 at 1:03pm
Perhaps the link between WinXP's clock application and the computer's BIOS clock got confused.

-------------
JonB - D-Light user


Posted By: jberner
Date Posted: 19 Oct 2008 at 1:46pm
I don't know what changed in 1.02 in regards to the scheduler but I couldnt get the scheduler to play for the life of me and figured it was just me doing something stupid. I put 1.02 on this morning and rebuilt my schedules and BANG! it works.

I bet you  guys tell me nothing with the scheduler changed.



Posted By: LightsOnLogan
Date Posted: 21 Oct 2008 at 12:46pm

Nothing that should have fixed this problem changed... I'm glad to hear it is working now though!



-------------
http://www.aurorashow.com/">



Print Page | Close Window

Bulletin Board Software by Web Wiz Forums® version 9.06 - http://www.webwizforums.com
Copyright ©2001-2007 Web Wiz - http://www.webwizguide.com