CAT5 pins for dmx data transmission
Printed From: Aurora
Category: Aurora Sequencer Software
Forum Name: Aurora 1.0.90 In DMX Mode
Forum Discription: Using the unofficial DMX patch
URL: http://www.aurorashow.com/forum/forum_posts.asp?TID=1161
Printed Date: 12 Mar 2025 at 8:04pm
Software Version: Web Wiz Forums 9.06 - http://www.webwizforums.com
Topic: CAT5 pins for dmx data transmission
Posted By: ATController
Subject: CAT5 pins for dmx data transmission
Date Posted: 12 Mar 2011 at 8:25am
|
First I'm extremely new to DMX, I'm contemplating a project shown at HolidayCoro.com under the corostar assembly instructions;RGB corostars. In using Aurora DMX, which CAT5 pins are used for the DMX data transmission? Just so I understand this whole process I can use the D-Light usb dongle to interface the described DMX Module in their instructions to control the rgb lights? Thanks for any feedback on this subject Kevin |
Replies:
Posted By: deweycooter
Date Posted: 14 Mar 2011 at 11:14pm
|
You need to build a standard ethernet cable, but switch wires 1&2 with 4&5 on one end. http://diylightanimation.com/wiki/index.php?title=Image:DLA-RJ45-wiring.jpg ------------- http://www.deweycooter.com/wiki/index.php/Aurora - Aurora Lights Wiki http://www.aurorashow.com/"> 
|
Posted By: JonB256
Date Posted: 26 Mar 2011 at 9:05am
|
For the existing controllers out there using CAT5, Pins 1 and 2 (Lynx Express, specifically), the "Data -" is on the Orange wire (Pin 2) and the "Data +" is on the White/Orange wire (Pin 1).
The LOR and D-Light boards use Pins 4 and 5, but "Data -" is on Pin 4 and "Data +" in on Pin 5. So you have to build a "crossover" with a "crossover" since DMX is polarity sensitive. (i.e., Pin 1 to Pin 5 and Pin 2 to Pin 4) ------------- JonB - D-Light user |
Posted By: deweycooter
Date Posted: 28 Mar 2011 at 10:38am
|
hmm, that's interesting. I'll have to double check how I did it. I don't remember crossing them.
------------- http://www.deweycooter.com/wiki/index.php/Aurora - Aurora Lights Wiki http://www.aurorashow.com/">
|
Posted By: ChrisL1976
Date Posted: 28 Mar 2011 at 11:24am
|
I moved Pin 1 to pin 4 and pin 2 to pin 5 and vice versa ------------- Chris www.lightsonsixth.com |
Posted By: JonB256
Date Posted: 30 Mar 2011 at 5:52am
|
I just looked at my working adapter and it is 1 to 5 and 2 to 4. If I get a chance, I'll make another going from 1 to 4 and 2 to 5 to see if also works. (I think I did that a few months ago but can't be positive) ------------- JonB - D-Light user |