Users guide
Printed From: Aurora
Category: Aurora Sequencer Software
Forum Name: Questions About Aurora
Forum Discription: Considering ordering but want more info from other Aurora users?
URL: http://www.aurorashow.com/forum/forum_posts.asp?TID=231
Printed Date: 12 Mar 2025 at 3:34pm
Software Version: Web Wiz Forums 9.06 - http://www.webwizforums.com
Topic: Users guide
Posted By: webbtech
Subject: Users guide
Date Posted: 19 Aug 2008 at 7:54am
|
Can anyone provide a link or other means of a users guide, what each button does etc....I couldnt find it on wiki.
Thanks
Mark ------------- Mark Webb |
Replies:
Posted By: LightChristmas
Date Posted: 19 Aug 2008 at 10:58am
|
The wiki hasn't been updated for quite some time as the creator (Dewey Cooter) is away on a long job.
Michael's wife is busily pounding away on a manual as we speak, but cannot say for certain when it will be released.
In the meantime, your best bet is to just ask here - a pain for now, I know. ------------- http://www.aurorashow.com/"> 
|
Posted By: LightsOnLogan
Date Posted: 19 Aug 2008 at 11:36am
|
Yes... I make a much better programmer than a technical writer (case in point, my book long FAQ on the grid that could probably be reduced to 2 short paragraphs by a good writer).
Fortunately I married someone who can understand my alien language and translate it into simple concise English. The help manual has turned out to be a large project in itself because Aurora has so many features to document.
In a couple days I should have some more information regarding the help file and an official release date for 1.0. ------------- http://www.aurorashow.com/"> 
|
Posted By: webbtech
Date Posted: 19 Aug 2008 at 8:05pm
|
ok dumb question time then...how do I build a sequence run and save it, I need several 12 channel runs to use and re use. Not just copy and paste but a way to hold onto that run and insert it when I need it.
What does the Y box mean? its uses...
What does the clock and arrow box used for?
What is the W sound wave do?
What does the grabber do?
I imported a spectrum file and want to add 32 more channels, do I need to add controllers or just add channels?
its a start...Sorry to be a pain in the arse. Spent 2 years with spectrum and I am kinda used to that.
Mark
------------- Mark Webb |
Posted By: LightChristmas
Date Posted: 19 Aug 2008 at 10:38pm
You can import your channel list from a previously saved sequence by clicking on: FILE and selecting IMPORT and clicking on "Import Channels From File" - this being a sequence containing the channel allocations you want.
The "Y" box allow you to select an entire section of a sequence for cutting/pasting.
The "Clock" box is used for adding interval lines. A left click will drop an interval on the time line and a right click on it will delete an interval. Under Spectum, this is done automatically (1/10, 1/50, etc) at the sacrifice of unnecessary intervals which increase CPU loading.
The "W" is a real zinger! This is the Waveform To Event tool (W2E). This will intepret the waveform(s) in the Spectrogram and convert it into an event (lights will change intensity in proportion to the audio amplitude/
The Grabber will allow you take any effect in the sequence and "clone" it.
In Aurora, there are no controllers to add. Only channels. This allows for a higher degree of customization, rather then being locked into one mode of layout. If you're adding more than 32 channels, I'd recommend firing up Spectrum, creating the channel/controller list with it, then importing that into Aurora.
 Hardly a pain! Never be afraid to ask questions here, no matter how "stupid" you may think they are! The only "stupid" question in my book is the one that goes unasked!------------- http://www.aurorashow.com/">
|
Posted By: webbtech
Date Posted: 19 Aug 2008 at 10:49pm
|
Ok good start then, I had already imported a spectrum file and added the needed channels. I quess then the 2nd and 3rd set of 16 each should be on a different device id?
So hardware utility starts at 2 for first controller of 16, then should I use device 3 for 2nd controller and 4th for the 3rd?
I like the wave length idea, (color organ stuff) I suggested it for spectrum.
See Im not a christmas guy, I do Halloween. That color organ idea should work great for haunted house sounds...
Lucky me...Im 3 blocks from Marty Stack! Christmast Utah, how can anyone compete with that guy so close!
Mark ------------- Mark Webb |
Posted By: LightChristmas
Date Posted: 20 Aug 2008 at 7:18am
Don't confuse the D-Light HW Utility (in the Add-Ins tab) with any Aurora functions - that is there to just make life easier with the initial setup of a display. For adding controllers, you'll want to use the Add Channel function and make the appropiate changes to the Device ID and Channel Number there, you can later use the Bulk Channel Editor to make any global changes you might need. But yes, each controller needs a different Device ID. Aurora won't let you enter duplicate addresses, so no worries there. You should be able to scroll up on the Device ID tab to see/use #1. The Network Segment should be left at 1 unless you are using more than one RS422 adapter.
------------- http://www.aurorashow.com/">
|
Posted By: webbtech
Date Posted: 24 Aug 2008 at 4:27pm
|
OK we are getting somewhere, next question, Same imported some has some really tight event lines, any way to spead the program side to side so I can add events?
Pointing is a real challenge if you dont hit dead on. Tough to tell where it might land, even with practive its seems a struggle to aim between an H and the shimmer icon.
Mark ------------- Mark Webb |
Posted By: LightChristmas
Date Posted: 24 Aug 2008 at 4:52pm
|
Page Up/Page Down will expand/contract the time line so you can view the really tight spots. ------------- http://www.aurorashow.com/">
|
Posted By: webbtech
Date Posted: 25 Aug 2008 at 10:18pm
|
Update...things are going very well, like you said in another post, once you have the new system embeded in your head, things do seem to come faster and faster. I want to thank everyone for the imput I have recieved and at the speed of the answers. Also, I want to thank who ever came up with the importing of the channels, build one sequence and you can add it to another with out building it again and again, right there that paid for the software in time saved not building your channel line up each and every time. The keyboard shortcuts are saving my wrist too, I had surgery on it, but it still hurts like the dickens. If anyone has had similar issues with standard mice, you may want to check out 3M s joystick mouse. Well worth the money and puts your wrist in a much more comfortable position. Thanking you in advance for my next brain cramp!
Mark ------------- Mark Webb |
Posted By: webbtech
Date Posted: 02 Sep 2008 at 6:13pm
|
Oh boy with all the Spectrum folks moving over to these forums the amount of questions that will come about the users manual will be many, could some one put a simple task button explanation together to aid in helping Spectrum users get around the software.
I know it would help me too!
Mark ------------- Mark Webb |
Posted By: LightChristmas
Date Posted: 02 Sep 2008 at 6:27pm
|
Mike, You want me to do a video tutorial - nothing fancy, just the basics? Can have it done and a link posted tonight. ------------- http://www.aurorashow.com/">
|
Posted By: peteandvanessa
Date Posted: 02 Sep 2008 at 6:29pm
Yeah expect lots and lots of question especially when we get close to Halloween and then the XMAS rush :-)
|
Posted By: webbtech
Date Posted: 02 Sep 2008 at 7:34pm
Wow, if that could happen then life on these forums will be a lot more comfortable for the Spectrum folk moving over. The software is pretty much self explanitory however, the forward and back, expanding and contracting, the un needed use of adding controllers, etc would save us all future headaches! Daddy used to say, "if you cant lower heaven, raise hell." We need to lower heaven (Aurora) to save us from hell. (frustrated users)
Just my 2 cents worth.
Mark ------------- Mark Webb |