DMX for Firefli is now working
Printed From: Aurora
Category: Aurora Sequencer Software
Forum Name: Aurora 1.0.90 In DMX Mode
Forum Discription: Using the unofficial DMX patch
URL: http://www.aurorashow.com/forum/forum_posts.asp?TID=1164
Printed Date: 27 Apr 2024 at 8:21am
Software Version: Web Wiz Forums 9.06 - http://www.webwizforums.com
Topic: DMX for Firefli is now working
Posted By: JonB256
Subject: DMX for Firefli is now working
Date Posted: 30 Mar 2011 at 5:57am
Darryl has tested the firmware (but I've been busy at work).
Connect up to 10 strings (160 pixels / 480 channels) to a single controller!
Adjust the dimming linearity values for Red, Green and Blue.
Make it work "backwards"
Subdivide the pixels (make it act like 8 pixels instead of 16) to reduce channel counts.
It is now on the D-Light website in the Open Forum.
-------------
JonB - D-Light user
|
Replies:
Posted By: JonB256
Date Posted: 03 Apr 2011 at 7:12pm
Done some significant testing now. The current DMX firmware for Firefli is working very well. So far, I'm just testing with a DMX output program (Abuelites), but it has worked great for multiple strings on a single controller.
The real test will be with Sequencing Software on fast and slow chases!!!
-------------
JonB - D-Light user
|
Posted By: JonB256
Date Posted: 06 Apr 2011 at 12:00pm
My testing with Aurora has not been great. :( While I have input several trial setups (I'm using Network 32 and it sees my D-Light dongle), I am not getting the correct colors out.
... by "not great" I mean that Red usually gives me solid white and Green will sometimes be Blue'ish.
How should I be setting up the channels? I have been adding a Firefli controller from the list.
How would I add a Firefli that actually had more strings? 32 pixels, 48 pixels, etc...
A "sample" file to look at might be useful.
-------------
JonB - D-Light user
|
Posted By: ChrisL1976
Date Posted: 06 Apr 2011 at 1:10pm
Jon.
I would think some sort of open channel controller will be created in future version so you can run 1 channel or 100 channels from a controller.
As of now, you need to set it up as a normal 16 channel controllers. The combine the channels by RGB. Thats how I did one of my pixel controllers for 15 rgb modules. . pixel 1 (Ch1 red, Channel 2 blue, channel 3 green) Pixel 2 (channel 4 red, channel 5 blue, channel 6 green) and so on.
-------------
Chris
www.lightsonsixth.com
|
|