sequence opening problem
Printed From: Aurora
Category: Aurora Sequencer Software
Forum Name: Bug Reports
Forum Discription: This is the place to report bugs
URL: http://www.aurorashow.com/forum/forum_posts.asp?TID=1248
Printed Date: 27 Apr 2024 at 10:20am
Software Version: Web Wiz Forums 9.06 - http://www.webwizforums.com
Topic: sequence opening problem
Posted By: polarass07
Subject: sequence opening problem
Date Posted: 13 Nov 2011 at 7:57pm
|
My pc crashed and im just about back to normal except for one sequence. When i try to open it i get this message....
An error has occurred while loading the picture for this sequence debugging info follows: Reload picture error=481 Invalid picture loc=3 loading picture...
Any ideas? i have ran it through the schedular and it runs but i added some new lights and need to update the sequence.
Thanks, Les ------------- 
|
Replies:
Posted By: ATController
Date Posted: 14 Nov 2011 at 1:06pm
| Were you using another image for the sequence in question? |
Posted By: polarass07
Date Posted: 14 Nov 2011 at 8:46pm
|
i cant open it up to attach my house image to it. Im guessing its got the default image now. But i cant even get it open to find out. -------------
|
Posted By: Jonathan
Date Posted: 14 Nov 2011 at 9:33pm
|
First, make sure the picture you were using wasn't corrupted in the crash. Open it in an editor (like Paint) and then re-save it as "default.jpg" in a 1024 x 768 size. Then place it directly into the Aurora folder. You'll actually want to make sure the original image in question isn't stored where you told the system it would be. When you open up Aurora, your sequence will go searching for the image, and not finding it, will revert to the default picture, which you have now replaced with the actual image you need. From then on, you won't need to select where the image is stored and then you can just use the default setting. ------------- ~Jonathan |
Posted By: LightsOnLogan
Date Posted: 15 Nov 2011 at 12:26pm
|
That sounds like a corrupt or incorrect format picture file that Aurora can not recognize. Try deleting or renaming the bad picture file to force Aurora to use the default picture instead. ------------- http://www.aurorashow.com/"> 
|
Posted By: polarass07
Date Posted: 16 Nov 2011 at 10:00pm
|
all the rest of my sequences will open and run just fine. But for some reason this one wont even open up. Is there a back way to open up sequences? -------------
|
Posted By: LightsOnLogan
Date Posted: 17 Nov 2011 at 7:17am
|
Do you know what picture file is specified in the sequence? If you delete or rename that file then Aurora will prompt you for a new one when you try to open it. Give that a try. If (and only if) that does not work, then try this procedure: 1) Download the file: http://www.aurorashow.com/downloads/RemovePicture.zip 2) Unzip it into your Aurora Sequencer folder 3) Run RemovePicture.exe 4) Specify the file name/path to your sequence file in the text box (sorry, no file browser here-- this is a quickly thrown together hack) 5) Click "Do It!" 6) After it finishes you should have a sequence file with "_NOPICTURE.dls" added to the name in your sequences folder. That new file should open properly. There are no guarantees on the above procedure since the only testing it received is about 1 minute worth on my development PC. Michael ------------- http://www.aurorashow.com/">
|